Description
ELEGOO Fast PETG Filament (White)
ELEGOO Rapid PETG (polyethylene terephthalate – a durable plastic modified for high-speed printing) filament in white is designed to print at speeds up to 600 mm/s without compromising quality. Thanks to its good flow and low shrinkage, the material allows for aesthetically pleasing, warp-free models, even for the most challenging projects.
Durable for everyday use
Rapid PETG combines the ease of printing typical of PLA (polylactide, a biodegradable plastic made from plant starch) with the strength similar to ABS (acrylonitrile butadiene styrene, an impact-resistant plastic commonly used in electronics and appliances). The filament is ideal for utility projects that require resistance to pressure, impacts, or heavy use.
Hassle-free management
The material is wound evenly and carefully, reducing the risk of tangles. The spool, made from recycled materials, is vacuum-packed with a moisture absorber to protect it from dust and water. Rapid PETG is compatible with most FDM (Fused Deposition Modeling—a technology in which plastic is melted and applied in layers) 3D printers.
General
| Producer | ELEGOO |
|---|---|
| Model | 50.203.0217 |
| Color | White |
| Weight | 1 kg |
Recommended print settings
| Drying settings before printing | 70 ± 5 °C |
|---|---|
| Ambient temperature and humidity | ≤ 70 °C, ≤ 20% relative humidity (store with moisture absorber) |
| Nozzle temperature | 240-270 °C |
| Table temperature (depending on printer and surface) | 65-75 °C |
| Type of work surface | Textured PEI (polyetherimide – a tough, sticky material used as a base for 3D printing) or other compatible surface |
| Print speed | Less than 600 mm/s |
Physical properties
| Density | 1.29 g/cm³ |
|---|---|
| Melting point | 216 °C |
| Deflection temperature under load | 72°C |
| Softening temperature (Vicat test) | 70°C |
Mechanical properties
| Tensile Strength (XY – measurement in the horizontal plane of the print, where the material is strongest) | 42 ± 2 MPa |
|---|---|
| Elongation at break (XY) | 8.9% ± 1.5% |
| Flexural strength (XY) | 68 ± 2 MPa |
| Flexural modulus (XY) | 2097 ± 173 MPa |
| Impact Resistance (XY) | 87.6 ± 4.2 kJ/m² |
Reviews
There are no reviews yet.